 | Up a level |
Basavaraju, K. C. and Damappa, T. and Rai, S. K. (2008) Miscibility studies of hydroxy propyl methyl cellulose and poly(ethylene oxide) by viscometry, ultrasonic, and refractometric methods. Journal of Macromolecular Science, Part B, 47 (3). pp. 417-425.
Basavaraju, K. C. and Damappa, T. and Rai, S. K. (2006) Preparation of chitosan and its miscibility studies with gelatin using viscosity, ultrasonic and refractive index. Carbohydrate Polymers, 66 (3). 357 - 362. ISSN 1879-1344
Basavaraju, K. C. and Demappa, T. and Rai, S. K. (2007) Miscibility studies of polysaccharide Xanthan gum and PEO (polyethylene oxide) in dilute solution. Carbohydrate Polymers, 69 (3). 462 - 466. ISSN 0144-8617
Basavaraju, K. C. and Jayaraju, J. and Rai, S. K. and Damappa, T. (2008) Miscibility studies of xanthan gum with gelatin in dilute solution. Journal of Applied Polymer Science, 109 (4). pp. 2491-2495. ISSN 1097-4628
Bhat, Vishwanath and Shivakumar, H. R. and Rai, K. S. and Sanjeev, G. (2014) Effect of electron beam irradiation on physico-chemical properties of polyacrylamide films. Radiation Effects and Defects in Solids, 169 (2). pp. 137-143. ISSN 1042-0150
Bhat, Vishwanath and Shivakumar, H. R. and Rai, K. Sheshappa and Sanjeev, Ganesh (2012) Effect of electron beam irradiation on physico-chemical properties of pullulan. Journal of Radioanalytical and Nuclear Chemistry, 293 (1). pp. 431-435. ISSN 1588-2780
Bhat, Vishwanath and Shivakumar, H. R. and Sheshappa, R. K. and Sanjeev, G. (2014) Preparation and study on miscibility, thermal behavior of biocompatible polymer blends of xanthan Gum-polyacrylamide. International Journal of Plastics Technology, 18 (2). pp. 183-191. ISSN 0975-072X
Chandralekha, F. and Illiger, Sudhir Ramswamy and Rao, K. P. and Demappa, T. (2008) Miscibility studies of HPMC/PVA blends in water by viscosity, density, refractive index and ultrasonic velocity method. Carbohydrate Polymers, 74 (4). 779 - 782. ISSN 1879-1344
Chandran, M. S. and Krishna, M. and Salini, K. and Rai, K. S. (2010) Preparation and characterization of chain-extended bismaleimide/carbon fibre composites. International Journal of Polymer Science, 2010 (987357). p. 8. ISSN 1687-9430
Demappa, Mahadevaiah T. (2007) Polymerization kinetics of methylmethacrylate by oxidation: Reduction system using cerium(IV)/lactic acid in aqueous medium. Journal of Applied Polymer Science, 103 (6). pp. 3498-3505. ISSN 1097-4628
Demappa, T. and Ananda, S. (2000) Kinetics of oxidation of indole in high indole concentration range by bromamine-B in alkaline medium catalysed by Os(VIII). Asian Journal of Chemistry, 12 (4). pp. 1282-1290. ISSN 0970-7077
Demappa, T. and Mahadevaiah (2008) Polymerization of acrylonitrile initiated by cerium (IV)-oxalic acid redox system: A kinetic study. Journal of Applied Polymer Science, 108 (3). pp. 1667-1674. ISSN 1097-4628
Dezfuly, M. A. and Mahadevaiah and Demappa, T. (2013) Effective of different flocculants on fresh and stale sugarcane juice clarification. Research Journal of Recent Sciences, 2 (7). pp. 48-52. ISSN 2277-2502
Gopalakrishna, D. and Bagyalakshmi, G. and Demappa, T. (2017) A study on refractive index, orientational order parameter and distribution function in the nematic phase of a nematogenic compound. Molecular Crystals and Liquid Crystals, 646 (1). pp. 176-182. ISSN 1563-5287
Guru, G. S. and Prasad, P. and Shivakumar, H. R. and Rai, S. K. (2010) Miscibility studies of polysaccharide xanthan Gum/PVP blend. Journal of Polymers and the Environment, 18 (2). pp. 135-140. ISSN 1572-8900
Illiger, Sudhir R. and Chandralekha Fadnis and Demappa, T. and Jayaraju, J. and Keshavayya, J. (2009) Miscibility studies of HPMC/PEG blends in water by viscosity, density, refractive index and ultrasonic velocity method. Carbohydrate Polymers, 75 (3). pp. 484-488. ISSN 1879-1344
Jagadish, R. L. and Vijayakumar, T. R. and Rai, K. M. Lokanatha (2002) An efficient route for the synthesis of chloroaceticanhydride and benzyl mercaptan. Indian Journal of Chemical Technology, 9 (3). pp. 261-262. ISSN 0971-457X
Jayaraju, J. and Basavaraju, K. C. and Keshavayya, J. and Rai, S. K. (2006) Viscosity, ultrasonic, and refractometric studies of chitosan/polyethylene glycol blend in solution at 30, 40, and 50°C. Journal of Macromolecular Science, Part B, 45 (5). pp. 741-751. ISSN 1525-609X
Jayaraju, J. and Keshavayya, J. and Rai, S. K. and Basavaraju, K. C. (2008) Miscibility studies on chitosan/poly(vinyl alcohol) blends. Journal of Macromolecular Science, Part A Pure and Applied Chemistry, 45 (4). pp. 271-275. ISSN 1520-5738
Jayaraju, J. and Keshavayya, J. and Rai, S. K. and Shetty, Ravindra Rama (2008) Studies on the miscibility of chitosan/poly(vinyl pyrrolidone) blend in solution by viscometry, ultrasonic velocity, density and refractometry techniques at 30, 40, and 50°c. Journal of Macromolecular Science, Part B Physics, 47 (2). pp. 296-304. ISSN 1525-609X
Karippal, Jeena Jose and Murthy, H. N. Narasimha and Rai, K. S. and Krishna, M. and Sreejith, M. (2010) The processing and characterization of MWCNT/Epoxy and CB/Epoxy nanocomposites using twin screw extrusion. Polymer-Plastics Technology and Engineering, 49 (12). pp. 1207-1213. ISSN 1525-6111
Karippal, Jeena Jose and Narasimha Murthy, H. N. and Rai, K. S. and Krishna, M. and Sreejith, M. (2010) Effect of amine functionalization of CNF on electrical, thermal, and mechanical properties of epoxy/CNF composites. Polymer Bulletin, 65 (8). pp. 849-861. ISSN 0170-0839
Karippal, Jeena Jose and Narasimha Murthy, H. N. and Rai, K. S. and Krishna, M. and Sreejith, M. (2010) Electrical and thermal properties of twin-screw extruded multiwalled carbon nanotube/epoxy composites. Journal of Materials Engineering and Performance, 19 (8). pp. 1143-1149. ISSN 1059-9495
Kendaganna Swamy, B. K. and Siddaramaiah and Somashekar, R. (2003) Structure-property relationship of castor oil based diol chain extended polyurethanes (PUs). Journal of Materials Science, 38 (3). pp. 451-460. ISSN 1573-4803
Kumar, Sunil and Demappa, Thippaiah and Sannappa, J. (2022) Influence of KI salt concentration on the hydroxypropyl methylcellulose films: Optical study. Optical Materials, 129. ISSN 1873-1252
Laxmeshwar, Sandeep S. and Madhu Kumar, D. J. and Viveka, S. and Nagaraja, G. K. (2012) Preparation and properties of biodegradable film composites using modified cellulose Fibre-Reinforced with PVA. ISRN Polymer Science, 2012.
Laxmeshwar, Sandeep S. and Viveka, S. and Madhu Kumar, D. J. and Dinesha and Bhajantri, R. F. and Nagaraja, G. K. (2012) Preparation and characterization of modified cellulose fiber-reinforced polyvinyl alcohol/polypyrrolidone hybrid film composites. Journal of Macromolecular Science, Part A, 49 (8). pp. 639-647. ISSN 1520-5738
Mahadevaiah and Demappa, T. and Sangappa and Katoon, Bibi Ahamadi (2008) Polymerization of acrylonitrile initiated by Ce(IV)-sucrose redox system: A kinetic study. Journal of Applied Polymer Science, 108 (6). pp. 3760-3768. ISSN 1097-4628
Mahadevaiah and Shivakumara, L. R. and Demappa, T. and Singh, Vasudev (2017) Mechanical and barrier properties of Hydroxy Propyl Methyl Cellulose Edible Polymer Films with Plasticizer combinations. Journal of Food Processing and Preservation, 41 (4). ISSN 1745-4549
Mahentesha, B. and Jambagi, V. B. and Barigidad, N. N. and Laxmeshwar, S. S. and Devaru, V. and Narayanachar (2014) Synthesis, structure-activity relationship of iodinated-4-aryloxymethyl- coumarins as potential anti-cancer and anti-mycobacterial agents. European Journal of Medicinal Chemistry, 74. pp. 225-233. ISSN 0223-5234
Malure, M. and Laxmikanthiah, J. R. and Vishakante, G. D. and Khan, M. S. (2011) Preparation and evaluation of lithium carbonate loaded PEA microspheres for controlled drug delivery. LATIN AMERICAN JOURNAL OF PHARMACY, 30 (3). pp. 452-458. ISSN 0326-2383
Mujaheddin and Jagadish, R. L. and Rai, Sheshappa K. and Guru, G. S. (2012) Miscibility studies of Agar-agar/starch blends using various techniques. International Journal of Research in Pharmacy and Chemistry, 2 (4). pp. 1049-1056. ISSN 22312781
Nagaraja, G. K. and Demappa, T. and Mahadevaiah (2008) The study of free radical polymerization of acrylonitrile by oxidation–reduction system using potassium persulfate–thiourea in aqueous medium. Journal of Applied Polymer Science, 110 (6). pp. 3395-3400. ISSN 1097-4628
Nagaraja, G. K. and Demappa, T. and Mahadevaiah (2008) The study of free radical polymerization of acrylonitrile by oxidation–reduction system using potassium persulfate–thiourea in aqueous medium. Journal of Applied Polymer Science, 110 (6). pp. 3395-3400. ISSN 1097-4628
Nagaraja, G. K. and Vaidya, Vijayavittala P. and Rai, K. S. and Kittappa, M. (2006) An efficient synthesis of 1,5-thiadiazepines and 1,5-benzodiazepines by microwave-assisted heterocyclization. Phosphorus, Sulfur, and Silicon and the Related Elements, 181 (12). pp. 2797-2806. ISSN 1563-5325
Nagendra Kumar, K. M. and Rai, K. S. (2002) Polymerization of acrylonitrile initiated by the cerium(IV)-glutamine redox system: A kinetic study. Asian Journal of Chemistry, 14 (3). pp. 1311-1319. ISSN 0970-7077
Niranjana Prabhu, T. and Demappa, T. (2014) Thermal degradation kinetics, mechanical, and flame retardant properties of epoxy-HDPE fabric-clay composite laminates. Journal of Applied Polymer Science, 131 (18). pp. 9137-9143. ISSN 0021-8995
Padinhattayil, S. and Rai, K. S. (2020) Fabrication of graphene oxide/zinc oxide hybrid nanocomposite and assessment on structural, thermal and optical characterizations. Asian Journal of Chemistry, 32 (4). pp. 881-886.
Padma Priya, S. and Rai, S. K. (2005) Impact, compression, density, void content, and weight reduction studies on waste silk fabric/epoxy composites. Journal of Reinforced Plastics and Composites, 24 (15). pp. 1605-1610. ISSN 1530-7964
Padma Priya, S. and Rai, S. K. (2006) Studies on the mechanical performance of PMMA toughened epoxy-silk and PC toughened epoxy-silk fabric composites. Journal of Reinforced Plastics and Composites, 25 (1). pp. 33-41. ISSN 1530-7964
Padma Priya, S. and Ramakrishna, H. V. and Rai, S. K. (2006) Density, void content, weight reduction, and chemical resistance studies on waste silk fabric reinforced acrylonitrile-butadiene-styrene-toughened epoxy composites. Journal of Reinforced Plastics and Composites, 25 (4). pp. 339-345. ISSN 1530-7964
Padma Priya, S. and Ramakrishna, H. V. and Rai, S. K. (2006) Utilization of granite powder as filler in epoxy phenol cashew nut shell liquid-toughened epoxy resin for impact and compression strength. Journal of Reinforced Plastics and Composites, 25 (3). pp. 227-234. ISSN 1530-7964
Padma Priya, S. and Ramakrishna, H. V. and Rai, S. K. and Rajulu, A. V (2006) Studies on tensile properties and chemical resistance of glass mat-epoxy toughened with epoxy phenol CNSL composites. Journal of Reinforced Plastics and Composites, 25 (2). pp. 141-147. ISSN 1530-7964
Prabhu, T. N. and Demappa, T. and Harish, V. and Prashantha, K. (2013) Effect of organo modified clays reinforcement on thermal expansion and degradation kinetics in unsaturated polyester composites. Asian Journal of Chemistry, 25 (10). pp. 5431-5436.
Prabhu, T. N. and Demappa, T. and Harish, V. and Prashantha, K. (2013) Mechanical, thermal and flame-retardant properties of epoxy-nylon fabric-clay hybrid laminates. High Performance Polymers, 25 (5). pp. 559-565.
Prabhu, T. N. and Demappa, T. and Harish, V. and Prashantha, K. (2015) Synergistic effect of clay and polypropylene short fibers in epoxy based ternary composite hybrids. ADVANCES IN MATERIALS RESEARCH-AN INTERNATIONAL JOURNAL, 4 (2). pp. 97-111. ISSN 2234-179X
Prasad, P. and Guru, G. S. and Shivakumar, H. R. and Sheshappa Rai, K. (2012) Investigation on miscibility of Sodium Alginate/Pullulan Blends. Journal of Polymers and the Environment, 20 (3). pp. 887-893. ISSN 1572-8900
Prasad, P. and Guru, G. S. and Shivakumar, H. R. and Sheshappa Rai, K. (2008) Miscibility, thermal, and mechanical studies of hydroxypropyl methylcellulose/pullulan blends. Journal of Applied Polymer Science, 110 (1). pp. 444-452. ISSN 1097-4628
Rai, S. K. and Padma Priya, S. (2006) Utilization of waste silk fabric as reinforcement for acrylonitrile butadiene styrene toughened epoxy matrix. Journal of Reinforced Plastics and Composites, 25 (6). pp. 565-574. ISSN 1530-7964
Rajulu, A. V. and Reddy, R. L. N. and Raghavendra, S. M. and Syed, A. A. (1998) Ultrasonic, refractometric and viscosity studies of some polymer blends in solution. Journal of Polymer Materials, 15 (3). pp. 325-327.
Rama, S. R. and Pavithra, G. K. and Rai, S. K. (2013) Studies on mechanical and fractographic behavior of polycarbonate-toughened epoxy-granite particle hybrid Composites. Polymer - Plastics Technology and Engineering, 52 (11). pp. 1122-1126. ISSN 0360-2559
Rama, S. R. and Rai, S. K. (2010) Studies on physicomechanical properties of fly Ash-filled hydroxyl-terminated polyurethane-toughened epoxy composites. Journal of Reinforced Plastics and Composites, 29 (14). pp. 2099-2104. ISSN 1530-7964
Ramakrishna, H. V. and Padma Priya, S. and Rai, S. K. (2007) Flexural, compression, chemical resistance, and morphology studies on granite powder-filled epoxy and acrylonitrile butadiene styrene-toughened epoxy matrices. Journal of Applied Polymer Science, 104 (1). pp. 171-177. ISSN 1097-4628
Ramakrishna, H. V. and Padma Priya, S. and Rai, S. K. (2005) Studies on tensile and flexural properties of epoxy toughened with PMMA/granite powder and epoxy toughened with PMMA/fly ash composites. Journal of Reinforced Plastics and Composites, 24 (12). pp. 1269-1277. ISSN 1530-7964
Ramakrishna, H. V. and Padma Priya, S. and Rai, S. K. (2005) Tensile, flexural properties of unsaturated polyester/granite powder and unsaturated polyester/fly ash composites. Journal of Reinforced Plastics and Composites, 24 (12). pp. 1279-1287. ISSN 1530-7964
Ramakrishna, H. V. and Padma Priya, S. and Rai, S. K. (2006) Utilization of flyash as filler for polybutyleneterepthalate-toughened epoxy resin. Polymer Engineering & Science, 46 (7). pp. 946-953. ISSN 1548-2634
Ramakrishna, H. V. and Padma Priya, S. and Rai, S. K. (2006) Utilization of flyash as filler for polybutyleneterepthalate-toughened epoxy resin. Polymer Engineering & Science, 46 (7). pp. 946-953. ISSN 1548-2634
Ramakrishna, H. V. and Priya, S. P. and Rai, S. K. (2006) Effect of fly ash content on impact, compression, and water absorption properties of epoxy toughened with epoxy phenol cashew nut shell liquid-fly ash composites. Journal of Reinforced Plastics and Composites, 25 (5). pp. 455-462. ISSN 1530-7964
Ramakrishna, H. V. and Rai, S. K. (2006) Effect on the mechanical properties and water absorption of granite powder composites on toughening epoxy with unsaturated polyester and unsaturated polyester with epoxy resin. Journal of Reinforced Plastics and Composites, 25 (1). pp. 17-32. ISSN 1530-7964
Ramakrishna, H. V. and Rai, S. K. (2005) A study on the mechanical and water absorption properties of granite powder/epoxy toughened with PMMA and fly ash/epoxy toughened with PMMA composites. Journal of Reinforced Plastics and Composites, 24 (17). pp. 1809-1816. ISSN 1530-7964
Rani, N. S. and Sannappa, J. and Demappa, T. and Mahadevaiah (2014) Structural, thermal, and electrical studies of sodium iodide (NaI)-doped hydroxypropyl methylcellulose (HPMC) polymer electrolyte films. Ionics, 20 (2). pp. 201-207. ISSN 1862-0760
Ravi Prakash, S. D. and Ramakrishna, H. V. and Rai, S. K. and Rajulu, A. Varada (2003) Miscibility studies of sodium alginate/poly(vinyl alcohol) blend in water by viscosity, ultrasonic, and refractive index methods. Journal of Applied Polymer Science, 90 (1). pp. 33-39. ISSN 1097-4628
Salini, K. and Krishna, M. and Narasimha Murthy, H. N. and Rai, K. S. and Satheesh Chandran, M. (2010) The effect of the addition of acrylonitrile-butadiene styrene on the mechanical properties of bismaleimide/carbon composites. Polymer-Plastics Technology and Engineering, 49 (13). pp. 1390-1394. ISSN 1525-6111
Sangappa and Asha, S. and Demappa, T. and Sanjeev, Ganesh and Parameswara, P. and Somashekar, R. (2009) Spectroscopic and thermal studies of 8 MeV electron beam irradiated HPMC films. Nuclear Instruments & Methods In Physics Research Section B-Beam Interactions With Materials And Atoms, 267 (14). pp. 2385-2389. ISSN 1872-9584
Sangappa and Demappa, T. and Mahadevaiah and Ganesh, S. and Divakara, S. and Somashekar, R. (2008) Microstructural parameters in electron-irradiated hydroxypropyl methylcellulose films using X-ray line profile analysis. Journal of Applied Polymer Science, 109 (6). pp. 3983-3990. ISSN 1097-4628
Sanoop, P. and Sheshappa Rai, K. (2021) Analogy and comparative study of hydroxypropyl methylcellulose (HPMC) biopolymer with graphene oxide and zinc oxide nano fillers. Asian Journal of Chemistry, 33 (7). pp. 1513-1518.
Sanoop, P. and Sheshappa Rai, K. (2021) PVA/GO-Zno hybrid nanocomposites: synthesis, analysis and applications. Indian Journal of Science and Technology, 14 (23). pp. 1982-1992. ISSN 0974-5645
Shetty, Rama Ravindra and Rai, S. K. (2009) Compression, impact and fractographic studies on granite powder-filled htpu-toughened epoxy composite. Journal of Reinforced Plastics And Composites, 28 (10). pp. 1255-1263. ISSN 1530-7964
Shetty, Ravindra Rama and Rai, S. K. (2008) Tensile, flexural, density and void content studies on granite powder filled hydroxyl terminated polyurethane toughened epoxy composite. Journal of reinforced plastics and composites, 27 (15). pp. 1663-1671. ISSN 1530-7964
Shivakumar, K. and Veeraiah, M. K. and Rai, K. S. and Sherigara, B. S. and Made Gowda, N. M. (2007) Kinetics of polymerization of acrylonitrile initiated by the vanadium(V)-bisulphite redox system in sulphuric and perchloric acid media. Journal of Molecular Catalysis A: Chemical, 273 (1). 218 - 223. ISSN 1381-1169
Somashekarappa, H. and Prakash, Y. and Mahadevaiah and Demappa, T. and Somashekar, R. (2013) Effect of microwave radiation on hydroxy propyl methyl cellulose polymer films and HPMC/poly(vinylpyrrolidone) polymer blend films using the wide-angle X-ray technique. Radiation Effects and Defects in Solids, 168 (11-12). pp. 912-923.
Somesh, T. E. and Siddaramaiah and Demappa, T. (2022) Tailoring of ternary nanocomposite films of poly(vinyl alcohol)/ AgAlO2@reduced graphene oxide: An active material for flexible supercapacitors. Journal of Solid State Chemistry, 309. ISSN 1095-726X
Sunitha, J. N. and Rajesh, C. S. and Rai, S. K. (2016) Electromagnetic interference shielding effectiveness and electrical conductivity of NI coated PCABS/PPS composites with reinforcement of carbon fibre. POLYMERS & POLYMER COMPOSITES, 24 (1). pp. 57-64.
Syed, M. A and Ramaraj, B. and Akhtar, S. and Syed, A. A (2010) Development of environmentally friendly high-density polyethylene and turmeric spent composites: Physicomechanical, thermal, and morphological studies. Journal of Applied Polymer Science, 118 (2). pp. 1204-1210. ISSN 0021-8995
Syed, Murtuza Ali and Siddaramaiah and Suresha, B. and Syed, Akheel Ahmed (2009) Mechanical and abrasive wear behavior of coleus spent filled unsaturated polyester/polymethyl methacrylate semi interpenetrating polymer network composites. JOURNAL OF COMPOSITE MATERIALS, 43 (21). pp. 2387-2400. ISSN 1530-793X
Vishwanath, Bhat and Shivakumar, H. R. and Rai, Sheshappa K. and Ganesh, S. and Prasad, P. and Guru, G. S. and Bhavya, B. B. (2012) In-Vitro release study of metoprolol succinate from the bioadhesive films of pullulan-polyacrylamide blends. International Journal of Polymeric Materials and Polymeric Biomaterials, 61 (4). pp. 300-307. ISSN 1563-535X
Prakash, Y. and Somashekarappa, H. and Mahadevaiah and Somashekar, R. (2013) Structure-property relation in HPMC polymer films plasticized with Sorbitol. In: AIP Conference Proceedings.
Rani, N. S. and Sannappa, J. and Demappa, T. and Mahadevaiah (2013) Structural and ionic conductivity behavior in hydroxypropylmethylcellulose (HPMC) polymer films complexed with sodium iodide (NaI). In: AIP Conference Proceedings.
