Effect of sintering temperature on structural, electrical, and ferroelectric properties of lanthanum and sodium co-substituted barium titanate ceramics

Alkathy, Mahmoud S. and Hezam, Abdo and Manoja, K. S .D. and Wang, Jingwei and Cheng, Chun and Byrappa, K. and James Raju, K. C. (2018) Effect of sintering temperature on structural, electrical, and ferroelectric properties of lanthanum and sodium co-substituted barium titanate ceramics. Journal of Alloys and Compounds, 762. 49 - 61. ISSN 1873-4669

Full text not available from this repository. (Request a copy)
Official URL: https://doi.org/10.1016/j.jallcom.2018.05.138

Abstract

This article reports the influence of sintering temperature on the structural, dielectric and ferroelectric properties of lead-free Ba0.98La0.01Na0.01TiO3 ceramics synthesized by conventional solid-state reaction technique. The calcination of the ceramic powders has been accomplished using microwave system at 1000 °C for 30 min and sintered at four different temperatures, i.e., 1250, 1300, 1350 and 1400 °C for 4 h. The XRD analysis along with Rietveld refinement confirms that all samples show a single phase tetragonal structure. The confirmation of tetragonal phase structure has been carried out using Raman study. The elemental composition and chemical states of the sintered pellets have been determined using XPS study. The investigation of Scanning Electron Microscopy (FE-SEM) revealed that the grain size increases with rising sintering temperature. The temperature and frequency dependence of dielectric properties has been investigated using Impedance spectroscopy in the frequency range of 60 Hz −1 MHz and temperature range of RT to 150 °C. The Ba0.98La0.01Na0.01TiO3 ceramic sintered at 1350 °C obtains the optimum dielectric constant of 2583 and dielectric loss <0.02 due to the superior incorporation of Na+, La3+ and suitable sintering temperature which is highly essential for the fabrication of ceramic capacitors. The studies of the temperature dependent dielectric permittivity indicate phase transition with a clear shift in the Curie temperature towards higher temperature side with sintering temperature. The ferroelectric properties of all sintered samples have been investigated at room temperature.

Item Type: Article
Uncontrolled Keywords: Sintering temperature, Co-substitution, Raman modes, XPS, Grain size, Dielectric constant, Ferroelectric
Subjects: D Physical Science > Material Science
Divisions: Department of > Material Science
Depositing User: Manjula P Library Assistant
Date Deposited: 06 Jul 2019 07:45
Last Modified: 06 Jul 2019 07:45
URI: http://eprints.uni-mysore.ac.in/id/eprint/4828

Actions (login required)

View Item View Item